Hi6 Robot Controller Operation Manual
English
EnglishKorean
English
EnglishKorean
  • Hi6 Robot Controller Operation Manual
  • About the Manual
    • Copyrights
    • Notation Convention
    • Safety Cautions
  • 1. Robot System
    • 1.1 Basic Configuration
      • 1.1.1 Controller
      • 1.1.2 Teach Pendant
    • 1.2 Basic Use
      • 1.2.1 Turning On the Power
        • 1.2.1.1 Input of the Power to the Motor and the Operable Status
      • 1.2.2 Turning Off the Power
      • 1.2.3 Changing the language of the teach pendant screen
      • 1.2.4 Screen of the Hi6 Teach Pendant
        • 1.2.4.1 Status Bar
        • 1.2.4.2 Log Bar
        • 1.2.4.3 Function Buttons
        • 1.2.4.4 Menu Buttons
        • 1.2.4.5 Work area
  • 2. Operation
    • 2.1 Manual Operation
      • 2.1.1 Operation Method
      • 2.1.2 Operation Speed Adjustment
      • 2.1.3 Step Forward/Backward
    • 2.2 Automatic Operation
      • 2.2.1 Operation Method
      • 2.2.2 Operation Speed Adjustment
    • 2.3 Step
      • 2.3.1 Step Statement Parameters
        • 2.3.1.1 Interpolation
        • 2.3.1.2 Pose
        • 2.3.1.3 Speed
        • 2.3.1.4 Accuracy
        • 2.3.1.5 Tool Number
        • 2.3.1.6 Stop Condition
        • 2.3.1.7 Comment
      • 2.3.2 Recording and Changing a Step Position
        • 2.3.2.1 Axis Angle Recording Coordinate
        • 2.3.2.2 Base and Robot Recording Coordinates
    • 2.4 R Codes
    • 2.5 Error Information
      • 2.5.1 Error Type
      • 2.5.2 Error Handling
    • 2.6 User Buttons
      • 2.6.1 Switching of the User Button Area
      • 2.6.2 Button Registration for Each Area
        • 2.6.2.1 Key Signal Output Function Area
        • 2.6.2.2 Spot Application Function Area
    • 2.7 Coordinate System
      • 2.7.1 Jog Keys
      • 2.7.2 Joint Coordinate System
      • 2.7.3 Robot Coordinate System
      • 2.7.4 User Coordinate System
      • 2.7.5 Tool Coordinate System
    • 2.8 Optimization of the Axis Origin and Tool Length
    • 2.9 Tool Data Automatic Calibration
  • 3. Program Writing
    • 3.1 Program Management
    • 3.2 Program Writing
      • 3.2.1 Statements
      • 3.2.2 Statement Inputting
        • 3.2.2.1 General Statement Inputting
        • 3.2.2.2 Inputting of a Step Statement with a Hidden Pose
        • 3.2.2.3 Recording Condition
      • 3.2.3 Statement Configuration
      • 3.2.4 Statement Editing
        • 3.2.4.1 Statement Editing Method
        • 3.2.4.2 Example of Statement Editing
        • 3.2.4.3 Line Number Editing Method
        • 3.2.4.4 Soft Keyboard
        • 3.2.4.5 Block Editing Mode
  • 4. Menu
    • 4.1 Use of Menus
    • 4.2 File Management
      • 4.2.1 File Management
      • 4.2.2 Renaming of a File and Folder
      • 4.2.3 Folder Management
        • 4.2.3.1 Folder Deletion
        • 4.2.3.2 Folder Creation
      • 4.2.4 File Protection
      • 4.2.5 Data Backup
      • 4.2.6 Data Restoration
    • 4.3 Program Conversion
      • 4.3.1 Recording Condition
      • 4.3.2 Recording Speed Conversion
      • 4.3.3 Recording Position
      • 4.3.4 Recording Coordinate System
      • 4.3.5 Coordinate Shifting
      • 4.3.6 Mirror Image
      • 4.3.7 Step Copy
        • 4.3.7.1 Example of Step Copy
    • 4.4 System Diagnosis
      • 4.4.1 System Version
        • 4.4.1.1 Controller System Updating
    • 4.5 Setting of Date and Time
  • 5. Condition Setting
    • 5.1 Operation Condition Setting
    • 5.2 Information of Operation Conditions Setting
  • 6. Monitoring
    • 6.1 Use of the Monitoring Function
    • 6.2 job
    • 6.3 Pose
    • 6.4 System Input
    • 6.5 System Output
    • 6.6 Public Input
    • 6.7 Public Output
    • 6.8 Global Variables
    • 6.9 Local Variables
    • 6.10 Operation time
    • 6.11 Log
    • 6.12 History
    • 6.13 System Character
    • 6.14 Task monitor
    • 6.15 Soft Keyboard
    • 6.16 workcell
    • 6.17 Help
    • 6.18 Sensor Sync
    • 6.19 Program reserve
  • 7. Set Up
    • 7.1 Use of the Menus in Settings
    • 7.2 User Environment
    • 7.3 Control Parameter
      • 7.3.1 Control Environment Setting
      • 7.3.2 Input/Output Signal Setting
        • 7.3.2.1 Input Signal Attribute
        • 7.3.2.2 Output Signal Attribute
        • 7.3.2.3 Input/Output Signal Setting Information
        • 7.3.2.4 Input Signal Assignment
        • 7.3.2.5 Input Signal Setting Information
        • 7.3.2.6 Output Signal Assignment
        • 7.3.2.7 Output Signal Setting Information
        • 7.3.2.8 Key Signal Output
        • 7.3.2.9 DIO Block Allocation
        • 7.3.2.10 Multiple Signal Output
        • 7.3.2.11 Multiple Signals Input
      • 7.3.3 Serial Port
      • 7.3.4 Robot Ready Condition
      • 7.3.5 Home Position Registration
      • 7.3.6 Coordinate System Registration
        • 7.3.6.1 User Coordinate System
        • 7.3.6.2 Stationary Tool Coordinate System
      • 7.3.7 Scheduled Program Execution
      • 7.3.8 Automatic Backup and Recovery
      • 7.3.9 Industrial Communication (fieldbus)
        • 7.3.9.1 Firmware Setting
        • 7.3.9.2 Industrial Communication Setting
        • 7.3.9.3 Monitoring
    • 7.4 Robot Parameters
      • 7.4.1 Tool Data
        • 7.4.1.1 Tool Data Setting
        • 7.4.1.2 Tool Data Setting Information
      • 7.4.2 Axis Origin
      • 7.4.3 Soft Limit
      • 7.4.4 Encoder Offset
        • 7.4.4.1 Encoder Offset Value Utilization
      • 7.4.5 B-Axis Deadzone
      • 7.4.6 Accuracy
      • 7.4.7 Additional Weight of Each Axis
        • 7.4.7.1 Coordinate System Origin of Each Axis
      • 7.4.8 Collision Detection (Function to Be Available Later)
        • 7.4.8.1 Collision Detection Sensitivity Setting
      • 7.4.9 Jog Inching Level Setting
        • 7.4.9.1 Main Functions of the Jog Inching Function
        • 7.4.9.2 Inching Jog Operation
    • 7.5 Application Parameters
    • 7.6 Initialize
      • 7.6.1 System Format
      • 7.6.2 Robot Type Selection
      • 7.6.3 Usage Setting
        • 7.6.3.1 Spot Welding
        • 7.6.3.2 Arc Welding
      • 7.6.4 Serial Encoder Reset
      • 7.6.5 Additional Axis Parameter Setting
      • 7.6.6 Mechanism Setting
    • 7.7 Auto Calibration
      • 7.7.1 Optimize Axis Origin and Tool Length
      • 7.7.2 Positioner Calibration
      • 7.7.3 Load Estimation Function
      • 7.7.4 Base Axis Calibration
        • 7.7.4.1 Base Axis Initial Setting
        • 7.7.4.2 Base Axis Calibration Program Teaching
        • 7.7.4.3 Base Axis Calibration Execution
        • 7.7.4.4 Operation After Base Axis Calibration
      • 7.7.5 Gravity Direction Auto Setting
      • 7.7.6 Calibration of the Robot and Tool
  • 8. R Codes
    • 8.1 Use of R Codes
    • 8.2 R0 for Resetting the Step Counter
    • 8.3 R115 for Copying a Program
    • 8.4 R117 for Deleting a Program
    • 8.5 R210 for Selecting a Spot Gun Number
    • 8.6 R211 for Setting the Servo Gun Squeeze Force
    • 8.7 R212 for Presetting the Servo Gun Moving Electrode Wear Volume
    • 8.8 R213 for Presetting the Servo Gun Fixed Electrode Wear Volume
    • 8.9 R214 for Selecting Welding Guns Simultaneously
    • 8.10 R215 for Setting the Squeeze Force in the Spot Welding Condition
    • 8.11 R220 for Setting the Panel Thickness (Sv)
    • 8.12 R358 for Changing the Servo Tool
    • 8.13 R359 for Servo Tool Encoder Power On Relay
    • 8.14 R361 for Setting the Jog Inching Level
  • 9. Property
    • 9.1 Use of the property Function
    • 9.2 Move-Step Position
      • 9.2.1 Hidden Pose Move Statement
      • 9.2.2 Pose Recording Move Statement and Pose Assign Statement
    • 9.3 Spot Welding Function
  • 10. Robot Language
  • Appendices
    • Rules on Occupational Safety and Health Standards, and Notice for Safety Inspection
  • Quality Assurance
Powered by GitBook
On this page

Was this helpful?

  1. 3. Program Writing
  2. 3.2 Program Writing
  3. 3.2.2 Statement Inputting

3.2.2.3 Recording Condition

Previous3.2.2.2 Inputting of a Step Statement with a Hidden PoseNext3.2.3 Statement Configuration

Last updated 3 years ago

Was this helpful?

When a statement is inputted using the [Record] button, the current posture of the robot will be recorded as the target pose, and the value set in advance using the [Rec.cond.] button will be applied to the move command (move) parameter. The following shows the method of setting the recording condition of a statement.

  1. Touch the [Rec.cond.] button on the left side of the Hi6 teach pendant screen. Then, the recording condition setting window will appear.

  1. After setting the interpolation, moving speed and unit, accuracy, and tool number, touch the [OK] button ().

  • When position recording is performed, the move statement will be recorded based on the condition set in the recording condition.

  • In the mechanism set, you can designate the configuration of the mechanism to be stored when position recording is performed.

If you briefly touch the [mechsets] button, the predefined mechanism set numbers will appear in sequence.

If you touch and hold the [mechsets] button, you can modify the existing set configuration in the Mechanism Set setting window, or add or delete a mechanism set by using the [+] or [-] button.