7.3.3 Serial Port

You can set the information required for serial port communication.

1. Touch the [2: Control Parameter > 3: Serial port] menu.

2. Set the parameters for each serial port.

No.	Description
	Detailed information on the port selected from the serial port list. You can set the port name and parameter values.
	[OK]: You can save the changes. [+]/[-]: You can add a new serial port or delete a serial port. A list of serial ports. Selecting a port name allows you to check and edit details. [Copy page]/[Paste page]: You can copy the serial port information and paste it to another port. Select the name of the port information to be copied from the list, touch the [Copy page] button, select the name of the port to which the value is to be applied, and touch the [Paste page] button.

Refer to the following information when setting the usage of the serial port.

• Sensor: For receiving the shift data by accessing the vision sensor

• LVS: For connecting with the laser vision sensor for the weld line follow-up

• MODBUS: The MODBUS slave function of the Hi6 controller