Hi6 Robot Controller Manual - Robot Language HRScr
English
English
  • Hi6 Robot Controller Function Manual - Robot Language HRScript
  • 1. Overview
    • 1.1 Introduction of HRScript
  • 2. Basic Syntax
    • 2.1 Statements
    • 2.2 Identifiers
    • 2.3 Types of Statements
      • 2.3.1 Procedures
      • 2.3.2 Assignment Statements
      • 2.3.3 Comment Statements
      • 2.3.4 Labels
    • 2.4 First Program – Hello, World!
    • 2.5 Data Type
      • 2.5.1 String Data Type
      • 2.5.2 Number Data Type
      • 2.5.3 Boolean Data Type
      • 2.5.4 Array Type and Object Type
    • 2.6 Variables
    • 2.7 Binary and Hexadecimal
    • 2.8 Operators and Expressions
    • 2.9 Functions
      • 2.9.1 Math Functions
      • 2.9.2 String Functions
      • 2.9.3 Date and Time Functions
      • 2.9.4 Constructor Functions
      • 2.9.5 Other Functions
  • 3. Flow-Control Statements and Sub-Program
    • 3.1 Address
    • 3.2 Stop or Wait Statement
      • 3.2.1 stop
      • 3.2.2 end
      • 3.2.3 delay
      • 3.2.4 wait
    • 3.3 Branch Statement
      • 3.3.1 goto
    • 3.4 Conditional Statements
      • 3.4.1 Single-Line if
      • 3.4.2 if-endif
      • 3.4.3 if-else-endif Statement
      • 3.4.4. if-elseif-else-endif
      • 3.4.5 switch-case-break-end_switch
    • 3.5. Nested Flow-Control Statements
    • 3.6 Loop Statements
      • 3.6.1 for-next
    • 3.7 Call, Jump Statement and Subprograms
      • 3.7.1 call
      • 3.7.2 Parameters and param, return
      • 3.7.3 jump
    • 3.8 Local Variables and Global Variables
      • 3.8.1 Local Variables
      • 3.8.2 Global Variables
      • 3.8.3 Precedence
  • 4. Arrays and Objects
    • 4.1 Arrays
      • 4.1.1 Arrays
      • 4.1.2 Multidimensional Arrays
      • 4.1.3 Array Constructor Function
    • 4.2 Object
    • 4.3 Copied assignment of arrays and objects
    • 4.4 Call-by-reference and call-by-value
  • 5. Moving a Robotwith Robot Language
    • 5.1 Pose
    • 5.2 Shift
    • 5.3 Pose Expression
    • 5.4 move
    • 5.5 User Coordinate System (UCS)
  • 6. Communicating with External Devices
    • 6.1 FB Object: Digital I/O
      • 6.1.1 Input/Output Variables
      • 6.1.2 Examples
    • 6.2 ENet Module: Ethernet TCP/UDP Communication
      • 6.2.1 Constructor
      • 6.2.2 Member Variables
      • 6.2.3 Member Procedures
        • open
        • connect
        • send
        • recv
        • close
      • 6.2.4 Member Function
        • state
      • 6.2.5 Examples of TCP and UDP Communication
    • 6.3 Http_Cli Module: HTTP Client
      • 6.3.1 Constructor
      • 6.3.2 Member Variables
      • 6.3.3 Member Procedure
        • get
        • put
        • post
        • delete
      • 6.3.4 Examples of HTTP Client Communication
    • 6.4 Getting input from console bar
      • 6.4.1 input
Powered by GitBook
On this page

Was this helpful?

Edit on Git
  1. 6. Communicating with External Devices
  2. 6.1 FB Object: Digital I/O

6.1.2 Examples

Refer to the following examples of usage.

do2=1		# Turns on the bit output value of number 0 of fb0
fb2.dob3=0b00001111  	# Designates the 3rd byte output value of fb2 as a binary bit string
fb[4].dob1=0x0F  	# Turns on the lower 4 bits of the 1st byte output value of fb4, and turns off the upper 4 bits
var work_no=fb9.dib3    # Assigns the 3rd byte input value of fb9 to the work_no variable
if fb5.di43 then *err  	# Branches to the *err label when fb5.di42 is turned on
for idx=21 to 29
  fb3.do[idx]=1  	# Turns on all output signals do21 ~ do29 of fb3 
next
fb2.do3=fb2.do7=fb2.do11=1   # Turns on 3rd, 7th, and 11th output signals of fb2 at once
Previous6.1.1 Input/Output VariablesNext6.2 ENet Module: Ethernet TCP/UDP Communication

Last updated 3 years ago

Was this helpful?