6.13 System Character

In the panel selection window, touch [System character]. Then, the system character window will appear.

You can check all the various data of the robot system or only the data of a specific type of information.

Figure 44 System character

No.	Description
	Displays the data of the robot system. You can check the detailed data of a specific type by selecting individual types of information shown above.
	[Clear]: For the rest of the items except for the motion of each axis, you can initialize the maximum value of the system data by type.

System character monitoring function is only available in engineer mode.

• In Engineer Mode, the Engineer Mode icon () will blink on the status bar.
• Use caution as a serious problem may occur in the robot system if the setting is performed incorrectly.

Initialization

You can initialize the maximum value of the data by selecting the type of information you want.

1. Touch the [Clear] button at the bottom of the system properties window.

1. Touch the type of information you want to initialize. Then, the maximum value of the selected item will be initialized.