Hi6 Robot Controller Operation Manual

English

English

Hi6 Robot Controller Operation Manual
About the Manual
1. Robot System
- 1.1 Basic Configuration
  - 1.1.1 Controller
  - 1.1.2 Teach Pendant
- 1.2 Basic Use
2. Operation
3. Program Writing
- 3.1 Program Management
- 3.2 Program Writing
4. Menu
5. Condition Setting
- 5.1 Operation Condition Setting
- 5.2 Information of Operation Conditions Setting
6. Monitoring
7. Set Up
8. R Codes
9. Property
10. Robot Language
Appendices
- Rules on Occupational Safety and Health Standards, and Notice for Safety Inspection
Quality Assurance

Powered by GitBook

On this page

Was this helpful?

7. Set Up

7.6 Initialize

7.6.1 System Format

Previous7.6 Initialize Next7.6.2 Robot Type Selection

Last updated 3 years ago

Was this helpful?

On the status bar of the Hi6 teach pendant screen, check if the operation mode is set to manual mode.

If it is set to automatic mode, turn the mode switch of the teach pendant to set it to manual mode.

Touch the [Set Up] button > [5: Initialize > 1: System format] menu.

After checking the saved data, touch the [Initialize] button. All data and programs including control parameter files and machine parameter files will be deleted, and the initial setting values will be restored.